R1 DIGITAL-2 ESC (200A)

Brand: R1 Wurks
Product Code: R1 DIGITAL-2 ESC (200A)
Availability: 1
Price: $224.98
Ex Tax: $204.53

SPECIFICATIONS:

Scale: Radio controlled 1/10th scale vehicle

Continuous current: 200A

Current Burst: 950A

Power input: 4-8 cells Nimh/NiCd or 2s Lipo, 2s Life

BEC output: 6V 3A

Wire: 12awg

Cooling fan: 30x30x7mm Premuim High Speed Fan

Motor: Brushless sensored/sensorless motor

Motor limit: 3.0T

Dimension: 30.4mm(L) x 37.1mm (W) x 19.5mm(H)

Weight: 43g with no capacitor or fan

Download - ESC Instruction Manual.pdf

R1 Digital-2 Program Box

 

MORE INFO:

New from R1 Motor lab is the new Digital-2 200A top of the line brushless speed controller. Developed using the most advanced CPU technology and proprietary software combo, to deliver the smoothest most responsive throttle feel yet. Months of data analysis was done both on the race track & on the dyno to fine tune the Digital-2 power delivery & brake strength. The controller offers the most advanced throttle and brake adjustability to suit a wide range of driving styles. The system offers blinky mode (zero timing) for spec racing. All adjustable settings are easily programmed using a digital program box, designed with an intuitive, easy to use interface. The unit also features A.C.L.C. Advanced Component Level Cooling system, this design allows individual Mosfets (inner & outer components) to transfer heat directly to the upper heatsink. Our safety first approach forces the user to disconnect the battery when its time to power off the controller, minimizing the chances of leaving a live battery from draining. Most systems with push button power switch continuously drain the battery even after the power is off.

 

Features: 

Advanced High Speed Micro controller 

Enhanced throttle smoothness, feel & brake strength

Blinky mode for spec racing (zero timing)

Digital program box (w/Plug in and go) intuitive, easy to use interface and auto save feature

Safety first NO POWER SWITCH system, forces user to disconnect the battery for safety. Most systems with push button power switch continuously drain the battery even after the power is off.

Premium low ESR capacitors included 

All aluminum enclosure featuring A.C.L.C. (Advanced Component Level Cooling)

Adjustable throttle & brake frequency to further customize the throttle feel & power delivery

Most advanced programmable turbo & boost functions, featuring dyno tuned increments

Motor/ESC temperature protection

User Adjustable Low Voltage Protection 

MS Windows Software used for future firmware updates

Designed to pass ROAR/BRCA/EFRA zero timing esc regulation

 

19 Programmable Functions:

  1. Operation Mode

  2. Reverse Speed

  3. Low Volt Cut off (Battery Protection)

  4. Drag Brake

  5. Initial Brake

  6. Full Brake

  7. Brake Frequency

  8. Power Level

  9. Drive Frequency

  10. Neutral Dead Band

  11. Temp Cut Set

  12. Boost Timing

  13. Boost RPM

  14. Boost ACC (Boost Timing Acceleration)

  15. Turbo Timing

  16. Turbo Slope

  17. Turbo Delay

  18. Rotation Mode

  19. Restore Default 

 

Specifications: 

Scale: Radio controlled 1/10th scale vehicle

Continuous current: 200A

Current Burst: 950A

Power input: 4-8 cells Nimh/NiCd or 2s Lipo, 2s Life 

BEC output: 6V 3A

Wire: 12awg

Cooling fan: 30x30x7mm Premuim High Speed Fan 

Motor: Brushless sensored/sensorless motor 

Motor limit: 3.0T 

Dimension: 30.4mm(L) x 37.1mm (W) x 19.5mm(H)

Weight: 43g no capacitor, no fan 

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:




Top