NEXT SHIPMENT DUE NEXT WEEK
Mylaps RC4 Hybrid Power Transponder.
MYLAPS Personal RC4 Hybrid
Direct Powered Transponder.
•Half the size, half the weight of the original
•Low voltage operation: 2.8-16 Volt compatible
•Transponder and transponder holder are individual parts, so you can easily switch transponders between different cars (holders sold separately).
•Better quality cable (PTFE) that is fuel resistant
•1-4 cell LiPo compatible
•Fully hybrid: ◦100% compatible with RC2/RC3 Timing Systems (previously AMBrc) ◦100% compatible with RC4, and ready for the future
Dimensions (excluding holder) (WxLxH): 16x19x6mm
Weight: 4.7g (including holder)
Operating voltage: 2.8 - 16.0 V
Power consumption*: 19 mA
Wire isolation**: PTFE
Quick change holder: Yes
Connector: Generic receiver 3-pole *
Measured at 6.0 volt (receiver output) ** Gasoline/Nitro-methane resistant, no aging.
120 km/h (75 mph)
0 - 50 °C (32 - 122 °F)
16x19x6mm (0.7x0.8x 0.2 inch)
Weight incl. holder
3.0 - 16 VDC
Max. 90% relative
Feed from free receiver channel (ch3 or batt)
Connect using a standard Servo plug
14mA @ 6 VDC
PTFE / Teflon
Quick change holder
Generic receiver 3-pole
RC2, RC3 & RC4 Timing System
Practice RC4 Lite & Pro app